# Help to work my macines

**URL:** <https://forum.pmat.org.au/t/help-to-work-my-macines/678>\
**Category:** General Discussion\
**Created:** [26 September 2021 09:55 UTC](https://forum.pmat.org.au/t/help-to-work-my-macines/678 "2021-09-26T09:55:29Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![oldrocknut](https://forum.pmat.org.au/letter_avatar_proxy/v4/letter/o/e56c9b/32.png) [@oldrocknut](https://forum.pmat.org.au/u/oldrocknut)\
**Post date:** [26 September 2021 09:55 UTC](https://forum.pmat.org.au/t/help-to-work-my-macines/678/1 "2021-09-26T09:55:29Z")

</div>

G’day all,  
I need some tutoring, Anyone able to help?  
I would like to learn to work my Garmin E trax GPS properly. All I can manage is to record the location I am leaving from, turn it off and turn it on again when ready to return to my starting point. I would like to learn how to work the darn thing to set it to go to a given location from my starting point and return to it afterwards.  
I am also in need of a few lessons to work my Minelab CTX 3030. I bought it new a few years ago and never worked it out how to manage through the menu.  
I am happy to pay a reasonable fee to get tutored on either of them.  
Any one out there??  
Cheers  
Ray\*

> strong text

-

---

<div class="post-metadata">

**Author:** ![karl](https://forum.pmat.org.au/letter_avatar_proxy/v4/letter/k/34f0e0/32.png) [@karl](https://forum.pmat.org.au/u/karl)\
**Post date:** [26 September 2021 23:31 UTC](https://forum.pmat.org.au/t/help-to-work-my-macines/678/2 "2021-09-26T23:31:10Z")

</div>

I’ve found videos are the best way to learn.  
[Minelab CTX 3030 understanding the menu](https://www.youtube.com/watch?v=Htn-xgPCgP0)

For the GPS.  
[How to use a Garmin eTrex 10 GPS receiver](https://www.youtube.com/watch?v=RNhtn71k-wA)

---

<div class="post-metadata">

**Author:** ![oldrocknut](https://forum.pmat.org.au/letter_avatar_proxy/v4/letter/o/e56c9b/32.png) [@oldrocknut](https://forum.pmat.org.au/u/oldrocknut)\
**Post date:** [27 September 2021 02:47 UTC](https://forum.pmat.org.au/t/help-to-work-my-macines/678/3 "2021-09-27T02:47:01Z")

</div>

Thanks for the advise Karl. I will try and see if I can figure it out. Hopefully I see you next weekend in Gladstone.  
Thanks again  
Cheers
